Thank you for your continued use of our products and services.
With the update to the scheduling function in ugo Portal v1.17.1 (released April 15, 2026), the command types and display colors of commands such as the "Flow Repeat" command and the "Flow Loop Speed: Custom" command, which are classified under the "Move" command type, have been changed.
Please see below for details of the changes.
1. Change command type
The following commands, previously classified under the "Move" command type, have been moved to the "Settings" category in consideration of their operation with Flow.
Commands such as "Flow Repeat" and "Flow Patrol Speed: Custom" are widely used in relation to stationary patrol and greeting purposes at specific locations, such as "a Flow that greets people when ugo uses the camera." Therefore, we have redefined the command types along with the update to the scheduling function.
| Command name | Old command types (up to v1.17.0) | New command types (v1.17.1 and later) |
| Flow repeats | move | setting |
| Flow waits for a certain period of time. | move | setting |
| Flow circulating speed: Custom | move | setting |
| Flow circulating speed: default | move | setting |
| Change Flow Cycle Speed | move | setting |
2. Changing the display color
Due to the change in command types, the display color of commands on the editing and operation screens will change from "light blue" to "dark blue".
Please note that the timing of the application may vary depending on the screen.
- Editing screen (Flow / Command List / WorkPlan):
- If you add any of the following commands after March 12, 2026, they will be displayed in "dark blue". *The following commands included in existing Flows will continue to be displayed in "light blue", but this will not affect their operation.
- Target commands:
"Flow Repeat", "Flow Wait for a Fixed Time", "Flow Loop Speed: Custom", "Flow Loop Speed: Default", "Change Flow Loop Speed"
Conventional display colors |
Future display colors |
・Operation screen:
- Regardless of when the command was added, the target command will be displayed in "dark blue".
• Target commands:
"Flow Repeat", "Flow Wait for a Fixed Time", "Flow Loop Speed: Custom", "Flow Loop Speed: Default", "Change Flow Loop Speed"
Future display colors |
3. Impact on existing Flow and WorkPlans
This change only applies to the display colors and command types on the ugo Portal.
• Impact on operation:
- There are no changes to the behavior of commands incorporated into existing Flows and WorkPlans.
Maintain settings:
- This change will not result in the loss of parameter settings in existing Flow and WorkPlan configurations, and you can continue to use them as they are.
4. How to search for the changed command
To add a target command using the new command picker, please use one of the following methods.
For details, please refer to " How to Use the Command Picker ".
- Select from the "Settings" category:
- By expanding "Settings" from the command type, it will be displayed along with other setting commands.
• Use the search box:
- You can instantly search for commands regardless of category by entering the command name in the search box at the top of the command picker.
If you have any questions regarding this matter, please contact our support desk at cs@ugo.plus.
We sincerely apologize for any inconvenience this may cause and appreciate your understanding.
ugo will continue to strive to further improve our ability to provide products and services to our customers.
We appreciate your continued patronage.