What is Flow?
Flow is a function that automatically executes the commands you set in order from top to bottom.
It is used to automatically patrol specific routes, such as standing guard and automatically greet, or to provide guidance and monitor facilities.
Flows are set within their respective "Flow Groups" in the "Flow List".
To run a Flow, select the Flow group you want to use from the Flow list, then click the
Click Flow to do so.
*For more information on Flow groups, please refer to → Flow Settings > Flow Overview
How to run a Flow
Before operating ugo, please read [⚠Please read before operating ugo]
①Click the drop-down list to the right of "Flow List" in the upper right corner of the ugo operation screen.
② "Flow groups" are displayed in a list
Click the drop-down list to the right of the Flow group you want to use.
③The Flows you have set in the Flow group are displayed in a list.
Click to select the Flow you want to run.
④The contents of the Flow will be displayed.
After pressing it, click the command where you want to start the Flow.
The commands set in the Flow are executed automatically in order from the top.
The executed command will change color and have a ✓ on the right.
How to stop Flow
To stop Flow, use one of the following methods:
* If you press the button on the right
, Flow will stop after completing the command that was running when you pressed it. (It will not stop immediately.)
Example: If you press while touring the map, the flow will stop after you have completed the route.
・Press the space bar
ugo operation will stop immediately.
・Click Stop operation on the top right of the ugo operation screen
Immediately stops ugo's operation (same as space bar).
*If communication quality is poor (reference value: upload/download less than 20Mbps), it may not stop immediately.
How to restart Flow
To resume Flow, do one of the following:
・Click the command where you want to resume
Click