◆ Table of Contents
・How to open the robot management screen
◆ Function Overview
This function allows you to change ugo's name, building and group and more.
You can also set it to automatically start long-term recording and write administrative notes on this page.
Important: The "Robot Management" feature is only available to users with "Organization Administrator" account privileges.
◆ How to open the robot management screen
■ From the operation screen
This method can only be done when ugo is online.
①Click on the "robot name" or "serial number" on the "ugo icon".
②The robot management screen will open.
■From data management
This method can be done even when ugo is offline (powered off).
①Click Global Menu > Robots.
②Click on the ugo you want to change or inspect.
③The robot management screen will open.
◆ Robot management screen
| Item | Explanation | |
| ① | Current robot name | The name of your ugo will be displayed. This will be the name used within the ugo Portal. You can freely change the name in the [Name] field. |
| ② | Activity Report | An activity report will be displayed. If you open it from the robot management screen, you can check the activity report even if the ugo robot is offline. For details on the activity report, please see below. - Activity report - Health check |
| Delete button | Remove robot from ugo Portal. Do not press this unless instructed to do so by us. |
|
| ③ | Building/Group | ugo's building and group. You can change the building and group from the drop-down menu. *If the group is not displayed, it may be that the robot group for the building you want to change to has not yet been created. Please check the following. - Building management - I want to move ugo operations to a new facility (building) |
| ④ | Initial deployment floor | Set the floor where ugo will be deployed when it starts up. Do not leave this field blank and be sure to set the initial deployment floor. *If the floor is not displayed, it may not have been created yet. Please check the following. - Building management - I want to move ugo operations to a new facility (building) |
| ⑤ | Name | This will be the name displayed within the ugo Portal. You can freely change the name of your ugo. |
| ⑥ | Serial Number | The read-only serial number of your ugo. When contacting us, please provide the serial number of your ugo device. |
| ⑦ | Status | You can select [Unavailable], [Available], [Under Maintenance], or [In Repair Shop] from the dropdown menu. Please note that if you select [Unavailable], ugo will not be displayed on the operation screen even if it is online, and you will not be able to operate ugo. |
| ⑧ | Model | ugo's model name. |
| ⑨ | Version | The current ugo OS. |
| ⑩ | Portal Video Mode | You can choose between streaming mode and interval shooting mode. Normally, use streaming mode, but if the communication environment is extremely poor, consider using interval shooting mode. |
| ⑪ | Automatic start of long-time recording | You can set the long-time recording function to automatically start recording when you turn on ugo. After toggling the switch, press the [Update] button to automatically start long-time recording the next time you start ugo. - Long-time recording function |
| ⑫ | Admin Notes | You can fill in any information about the ugo robot. |
| ⑬ | Update | Save the changes you made on the robot management screen. After making changes, be sure to click the [Update] button to reflect the saved changes in ugo Portal. |
◆ How to change ugo's name
①Open the robot management screen.
②Edit the name in the [Name] field.
③After editing, press the [Update] button to apply the changes.
The changed name will be displayed.
◆ How to change ugo's building
①Open the robot management screen.
② From the [Building/Group] pull-down menu, select the new building and group.
*If the group is not displayed, it may be that the robot group for the building you want to change to has not yet been created.
Please check the building management. ・Building management ・I want to move ugo operations to a new facility (building)
③ Select the floor you want to set up from the [Initial Deployment Floor] pull-down menu.
*If the floor is not displayed, it may not have been created yet. Please check the building management. ・Building management ・I want to move ugo operations to a new facility (building)
④ After editing, press the [Update] button to reflect the saved content in ugo Portal.
⑤ The updated ugo's building and group will be reflected.
[ ⚠Important ]
⑥ If you change the building while ugo is running, be sure to restart it. You can either restart by turning the power switch off and on, or by restarting the system remotely. For details on restarting, please see here.
*If you start creating a map without restarting after changing the building you belong to, data inconsistencies may occur. Be sure to perform the restart procedure above.